Unipro 17-01-001 UniTire, Руководство пользователя

Страница: 12 / 36

12
Operating UniTire
R e f e r e n c e
G u i d e
3 WAYS TO PRESS BUTTONS
To use UniTire, you need to know how to press
the two buttons in 3 different ways:
1. A short press -
2. A longer press -
1 1
3. A very long press - 3 3
For the general use of UniTire, it is only neces-
sary to use the short press ( ) and the very
long press (
3 3
). Only secondary features
are operated with the longer press ( 1 1 ).
TURN UNITIRE ON
There are 3 different ways to turn UniTire on:
1. Keep pressing the right button (
3
) if you
want to measure and view the current pressure
(pressure mode) .
2.
Keep pressing the
left
button ( 3 ) if you
want to measure and save the pressure
values of all tires in the predefined sequence
(sequence mode) .
3. Press both the left and right buttons at the
same time ( 3 + 3 ) if you want to change
settings (setup mode) . This is not often used,
but you will need to set up UniTire at least
once.
UniTire starts by showing the startup screen as
long as you keep pressing the button(s). After
that you will be on either the pressure screen
(1), the pressure sequence screen (2) or in the
setup mode (3).
Startup screen with software version and
serial number.
TURN UNITIRE OFF
Press the right button (
3
) and hold it down
to turn UniTire off. When you see “POWER
OFF” in the display, you can release the button
again.
UniTire will turn itself off if no buttons are
pressed and no pressure is detected after a
predefined time.
When you turn UniTire off, you will have access
to the built-in help. Just press the
left button
( ) when the power off screen is shown.
Power off screen with access to help.
HELP MODE
UniTire has a built-in help feature. This is some
pages showing which buttons to press to use
the different functions.
In help mode you go to the next page by
pressing the
right button ( ) and to the previ-
ous page by pressing the left button ( ).
To leave help mode, turn UniTire off.