| 4
C64.65201 Issue 3
Jun 2019
Storage
The standard CLS LITE signals are supplied complete two to a pallet and ALT
variants one to a pallet with protective packaging which should not be removed prior
to delivery to site. The signal heads can be stored outdoors if required.
The signal should be retained on the pallet until ready for installation and
when removed should not be laid in such a way as the lenses are at risk of damage.
The time it is laid down should be kept to a minimum
The two warning labels, protective strip and Lower Backboard Extension can be left
in position until the head is mounted on the base but should be moved prior to
aligning the signal as shown in the Backboard Arrangement sections of this manual.
Safety
Before commencing assembly, any local safety requirements affecting the continued
safe working environment of the signalling installation and/or the working railway,
either directly or indirectly should be carried out. It is the user’s responsibility to
ensure all necessary risk assessments, permissions to work and preparatory safety
activities are correctly completed and adhered to throughout the installation and
subsequent life of the signal.
The gross weight of the signal is clearly marked on the top of the signal as shown
and installers should ensure that they have sufficient measures in place to ensure a
safe lift.
All activity on the CLS LITE, both mechanical and electrical, must only be carried out
by staff deemed competent in these fields by their employer. It is the user’s sole
responsibility to ensure that the CLS LITE is installed and/or maintained by
certificated and competent staff.
