AC-5000 User Guide
33
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :[email protected]
http://www.unioncomm.co.kr
No need to set them if the user selected a flexible IP.
The user can exit to the parent menu using [ENT~] key to apply the changed value after
finishing the setting while using [F4(←)] key to cancel input during setting. In this case,
the user can exit only by pressing the key for 2 seconds or longer if he/she is inputting the
value in the input box.
3.4.2. Server IP
When the user selects
◆
[ENT~]
[2. Network]
[1. Server IP] in the initial screen
◆
,
the following screen will appear.
Set the Server IP and Port.
To change the port, input it after moving the input
focus to the server port by pressing [ENT] key.
▶
Initial setting
Server Port: ‘9870’
The basic port value of authentication server is ‘9870’ for UNIS server, while ’2201’ for
Access server. Special care should be taken since changing these values requires the
similar changes in the server program.
The user can exit to the parent menu by pressing [ENT~] key to apply the changed value
after finishing the setting while pressing [F4(←)~] key to cancel the input value.
3.4.3. Terminal ID
When the user selects
◆
[ENT~] ( [2. Network] ( [3. Terminal ID] in the initial screen
◆
, the
following screen will appear.
Set Terminal ID and Authentication.
▶
Initial setting
Terminal ID: ‘1’
Authentication: ‘2. terminal/server’
Terminal ID is a unique ID used by the authentication server for the purpose of identifying
the terminal having ‘1’ as its default value. It must correspond to the entry/exit door ID set
in the server program, which can be input in a maximum of 8 digits.
▶
Authentication
This item determines the priority for authentication between terminal and network
server. Having ‘2. Terminal/Server’ as its default value, it operates as follow in each
mode.
