Uninet IColor 560, Руководство пользователя

Страница: 32 / 52

32
Using the ProRIP Software (Summary)
Once your image is loaded,
take note of the
preconfigured settings
relating to the media being
used in the printer.
The ‘Queue’ tab shows the
size of the media that will be
used, where to load the
media into the printer and
the paper type setting
recommended.
Each media type will contain
this preconfigured data to
make your printing
experience as easy as
possible. Overriding these
settings could yield
undesirable results.
To alter the color settings,
click on ‘Color Adjust’ and
adjust as needed. ‘Coverage
%’ represents the amount of
white/clear toner overprint or
underprint (depending on
which queue is being used).
The ‘Vary hole size in areas of
transparency’ option allows
for rasterization of colors that
fade into nothing and to
retain partial transparency. It
is suggested that this option
is left on, as it will only apply
itself where it’s needed.
‘Choke dictates how much
the overprint white layer is
pulled in under the colors.
The higher the number, to
more it’s pulled in (to avoid a
white outline around your
graphic).