46
8 & 16 Channel DVR Operation manual Revision 1.0
3.3.8.2 Prohibition
setting
Set up prohibition time to transmit the e-mail. Users can enter prohibition time from the
starting time and the ending time of transmitting the e-mail
3.3.8.3 SMTP Server IP address
Configure the IP address of the SMTP server to transmit the e-mail.
If you do not know your SMTP server IP address then go to Command Prompt in Windows,
then use ping and SMTP name address eg smtp.yahoo.com as below to get your SMTP IP
address. (Same method also applies to finding FTP server IP address from FTP name
address).
C:\>ping smtp.yahoo.com
Pinging smarthost.yahoo.com [216.109.112.27] with 32 bytes of data:
Reply from 216.109.112.27: bytes=32 time=230ms TTL=50
Reply from 216.109.112.27: bytes=32 time=235ms TTL=50
Reply from 216.109.112.27: bytes=32 time=236ms TTL=50
Reply from 216.109.112.27: bytes=32 time=232ms TTL=50
Ping statistics for 216.109.112.27:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 230ms, Maximum = 236ms, Average = 233ms
3.3.8.4 Authentication
Users can select authentication process dependent on SMTP server requirement.
Selects on/off for authentication process do authentication process whenever transmitting e-
mail messages through SMTP server.
3.3.8.5 Password
Enter sender’s mail password for authentication
3.3.8.6 Event
Log
Shows the event log of the selected channel. It can reset periodically by setting e-mail as