24
8 & 16 Channel DVR Operation manual Revision 1.0
2. Basic operation procedures
2.1 Power On/Off
2.1.1 Power
ON
Using either the keypad or the remote control, press the “Power” button. (Note: In case of
power outage or rare instance of system failure, the DVR will reboot automatically)
The Power LED light will turn from red to green when it has turned on properly.
In a standby mode, the LED is red.
2.1.2 Power
OFF
In order to shutdown the system, you must type in the password. The default password for
shutdown is “111111”.
2.2 Date & time setting
Set the date and time for the DVR.
(
System Setup in Main Menu
Æ
Time/Date
)
2.3 Change of live video channel in Mux mode
Live channel can be changed in Mux screeen of DVR.
This function is available for 4 ch / 6 ch/ 8 ch/ 9 ch of Mux screen ( it’s not available for 16 ch)
If OK key is pressed in the mux screen, box appears. Buttons are used to select the channel
And up/down key is used to move the channel.
After setting, if menu key is pressed, user can go back to Live picture.
2.4 Password setting procedure
Select or change your password for the DVR. The password must be a 6-digit number
consisting of numbers 0 ~ 8.
(
System Setup in Main Menu
Æ
System Password
)