UNIMO Technology MPEG-2 Скачать руководство пользователя страница 17

Страница: 17 / 125

UDR-204(C) Operation manual Revision 3.0

ZOOM: Zoom In/Out on the images during Live Viewing.

FRZ :

Freeze.

- Press button once to freeze the frame at live mode. Press again to return.

- To take a still image capture at playback mode.

Exchange of video input type : Press power button with FRZ button from NTSC to Pal

or PAL to NTSC.

MISC/SH: Miscellaneous functions or Shuttle Hold.

- MISC: To substitute for the five buttons that are placed on the remote control but on the

keypad (NET, OSD, Audio Mute, HDD, LOG).

- SH: Press button while using the Shuttle to hold the speed.SEARCH: Press once to open

the menu to search for recorded files.

SEARCH: Press once to open the menu to search for recorded files.

PTZ: Pan/Tilt/Zoom. Press once to access the Pan/Tilt/Zoom/Focus control mode.

Press again to exit.

MENU: Press button to access Main Menu. Press again to return.

5. Direction/select button

UP:

Used to move the cursor up; change possible values in the setup menu; under

PTZ control sub menu, used to move camera; or used to adjust focus.

DOWN: Used to move the cursor up; change possible values in the setup menu; under

PTZ control sub menu, used to move camera; or used to adjust focus.

LEFT: Used to change possible values in the setup menu. Under PTZ control menu,

used to move the camera left or used to do Zoom Out; At playback mode, used to

decrease playback speed.

RIGHT: Used to change possible values in the setup menu. Under PTZ control menu,

used to move the camera left or used to do Zoom In; At playback mode, used to

increase playback speed.

OK:

Used as a selection key. Under PTZ control menu, used to be interchanged P/T

mode with Z/F mode

6. Jog/Shuttle

Shuttle: Multi-speed forward/reverse playback. Under Network Setup sub menu,

used to input parameters fast.

Jog:

Frame by frame search.

7. IR receiver

Remote control signal receiver

Содержание MPEG-2






























































































































Результаты поиска

Содержание MPEG-2

Отзывы:

Похожие инструкции для MPEG-2

Бренды по названию

Популярные бренды

UNIMO Technology MPEG-2, Руководство пользователя

Результаты поиска

Содержание MPEG-2

Отзывы:

Похожие инструкции для MPEG-2

Бренды по названию

Популярные бренды