47
UDR-204(C) Operation manual Revision 3.0
3.3.8.2 Prohibition
setting
Set up prohibition time to transmit the e-mail. Users can enter prohibition time from the
starting time and the ending time of transmitting the e-mail
3.3.8.3 SMTP Server IP address
Configure the IP address of the SMTP server to transmit the e-mail.
If you do not know your SMTP server IP address then go to Command Prompt in Windows,
then use ping and SMTP name address eg mail.unimo.co.kr as below to get your SMTP IP
address. (Same method also applies to finding FTP server IP address from FTP name
address).
(Please note IP 211.104.85.230 is only for Unimo employees and will not work for your set-
up).
C:\>ping mail.unimo.co.kr
Pinging mail.unimo.co.kr [211.104.85.230] with 32 bytes of data:
Reply from 211.104.85.230: bytes=32 time=342ms TTL=114
Reply from 211.104.85.230: bytes=32 time=344ms TTL=114
Reply from 211.104.85.230: bytes=32 time=347ms TTL=114
Reply from 211.104.85.230: bytes=32 time=350ms TTL=114
Ping statistics for 211.104.85.230:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 342ms, Maximum = 350ms, Average = 345ms
3.3.8.4 Authentication
Users can select authentication process dependent on SMTP server requirement.
Selects on/off for authentication process do authentication process whenever transmitting e-
mail messages through SMTP server.
3.3.8.4.1 Password
Enter sender’s mail password for authentication