Unimig RAZOR CUT 40 AIR, Руководство по эксплуатации

Страница: 14 / 28

9 10
Place and hold the torch vertical at the edge of
the plate.
Pull the trigger to energise the arc. When the
cutting arc has cut through the edge of the
plate start moving evenly in the direction you
wish to cut.
11
To finish the cutting release the torch switch.
The air flow will continue for 30 seconds to
cool the torch head. Do not disconnect air
until this cooling period has been completed.
Failure to do this will result in torch head
damage.
SETUP FOR INTERNAL AIR PLASMA CUTTING
14