Unimax MA-2025-4G, Руководство пользователя

Страница: 55 / 72

57
[Figure 49: Input Circuit]
Please note that no external circuit is required when using the inputs at 3.3 V.
Factory Default Function
Following are the two methods to set back to factory default:
Hard Reboot
!
Press the factory reset switch, located on the left end plate next to the
power switch, and hold in for 5 seconds.
!
Release the reset button leave the for more than 40 seconds.
Soft Reboot
!
On Backup (Save/Reload) Page under Administrator, click on Restore to
Factory Default button to set configurations to factory default.
SMS Commands
The following SMS commands can be used to change the APN, ID, Password,
Authentication and even reboot the . After changing the APN, IPassword,
Authentication, will send a confirmation SMS after applying the change.
Commands
!
Change APN (e.g. telstra.extranet)
SMS Syntax: UNIMAX.PARK.APN telstra.extranet
!
Change Username, Password and Authentication (e.g. Username:
maxon@maxon.com.au , Password: maxon, Authentication: chap)