background image

 

 

 

Some experts believe that the incorrect or prolonged use of almost any product may 
cause serious injury or death. To help reduce your risk of serious injury or death, refer 
to the information below. For more information, see www.datastreamserver.com/safety 

 

Consult all documentation, packaging and product 
labelling before use. Note that some products feature 
documentation available online. It is recommended to 
print and retain the documentation. 

 

Before each use, check the product for loose/broken/ 
damaged/missing parts, wear or leaks (if applicable). 
Never use a product with 
loose/broken/damaged/missing parts, wear or leaks. 

 

Products must be inspected and serviced (if 
applicable) by a qualified technician every 6 months. 
This is based on average residential use by persons of 
average size and strength, and on a property of 
average metropolitan size. Use beyond these 
recommendations may require more frequent 
inspections/servicing. 

 

Ensure that all users of the product have completed a 
suitable industry recognised training course before 
being allowed access to the product. 

 

If this product has been purchased in error when 
considering the information presented here, contact 
the retailer directly for details of their returns policy, if 
required. 

 

The product has been supplied by a general 
merchandise retailer that may not be familiar with your 
specific application or description of application. Be 
sure to attain third-party approval from a qualified 
specialist for your application before use, regardless of 
any assurances from the retailer or its representatives. 

 

This product is not intended for use where fail-safe 
operation is required. As with any product (for 
example, automobile, computer, toaster), there is the 
possibility of technical issues that may require the 
repair or replacement of parts, or the product itself. If 
the possibility of such failure and the associated time it 
may take to rectify could in any way inconvenience the 
user, business or employee, or financially affect the 
user, business or employee, then the product is not 
suitable for your requirements. This product is not 
intended for use where incorrect operation or a failure 
of any kind, including but not limited to, a condition 
requiring product return, replacement, parts 
replacement or service by a technician may cause 
financial loss, loss of employee time or an 
inconvenience requiring compensation. 

 

Содержание UM-SP-35


















Отзывы: