11
Charging Instructions for the Unihoist Lift
Two 12 vdc batteries are located in the power pack. They are charged through a
figure of eight shaped socket in the base of the control unit. When charging is
required the mains lead is plugged into a wall outlet and the socket in the base of
the control box.
1. Fit the mains power lead to the small figure of eight shaped socket in the base
of the control box.
2. Plug the charger mains plug into a suitable mains outlet and switch the mains
supply
ON.
Note:
The Emergency Stop button has to be out of the battery pack to charge.
3. Charging is automatic and will fully charge the batteries over a period of eight
to twelve hours.
Note:
Even if the batteries are left on charge for extended periods the
charger will not allow the batteries to "overcharge".
4. To return the Lift to service, switch
OFF
the mains supply. Remove the small
plug from the socket in the control box. The Lift is now ready for use
Please pay particular attention to the following points, they will help
you avoid problems with discharged batteries.
•
KEEP
the batteries fully charged. Place the power pack on charge
whenever it is not in use. If it is more convenient to do so, place on charge
every night. The charger will not allow the batteries to "overcharge".
•
NEVER
run the batteries completely flat. As soon as the audible warning
sounds, complete the lifting operation and place the batteries on charge.
•
NEVER
store the power pack for long periods without regular charging
throughout the storage period.
•
ALWAYS
make sure the mains power to the charger is switched off before
connecting or disconnecting the power pack.
•
NEVER
leave the power pack plugged in to the charger with the mains power off.
•
ALWAYS
check Battery Charger Indicator (LCD) screen.
•
WARNING:
Walking away with the hoist whle the charger is still plugged into the
mains could cause the cable and the charger to short out.
•
NEVER
dispose of the Battery Pack in a fire as this may cause an explosion. If in doubt
contact Unihoist Limited.
SF25 Iss.5 July 2012
Содержание Graduate 150
