Unihoist Ltd Graduate 150, Инструкция по эксплуатации

Страница: 14 / 34

Maintenance Schedule for Unihoist Lifts
13
All Unihoist products are designed for minimum maintenance, however some
safety checks and procedures are required. A schedule of
DAILY checks and
tasks are detailed below.
Daily checks and biannual service, inspection and test will ensure a Lift is kept in
optimum safe working condition. A list of spare parts is available upon request.
The
LOAD TEST and CERTIFICATION should only be carried out by qualified,
competent personnel or an authorised service dealer.
Daily Check List
Unihoist Ltd strongly recommend the following daily checks are carried out before
using the lift.
• MAKE sure the Lift moves freely on it’s castors.
• MAKE sure the legs open and close correctly.
• MAKE sure the mast is fully engaged and the locking knob is fully tightened.
• MAKE sure the spreader bar is free to rotate and swing. Check the spreader
bar is firmly attached to the boom.
• EXAMINE the sling hooks on the spreader bar and side suspenders for
excessive wear. If in doubt – do not use.
• OPERATE the handcontrol or hydraulic unit to confirm the boom raises and
lowers satisfactorily.
• ON electric powered lifts check the operation of the emergency stop button.
• ON hydraulically operated lifts check for hydraulic fluid leakage. Any leakage
should be reported to a service engineer immediately and the lift should not
be used until it has been checked out.
• CONFIRM the Lift is not giving a low battery alarm when the handcontrol is
operated. If the alarm sounds DO NOT use and place on charge immediately.
• EXAMINE slings for fraying or other damage. DO NOT use any sling with
fraying or damage to the suspension straps or tears in the body of the sling.
• MAKE sure the User Manual is available.
SF25 Iss.5 July 2012