Unihedron SQM-LU-DL, Руководство оператора

Страница: 62 / 101

7 Unihedron Device Manager
7.13 Command line parameters
UDM can be started from the command line. Other stored parameters (like timezone) will be recalled automatically.
Here is the summary of options:
Table 7.5: Log continuous command line parameters
Parameter Description
-LCMS,x Every x seconds
-LCMM,x Every x minutes
-LCM,1 Every 1 minute on the minute
-LCM,5 Every 5 minutes on the 1/12th hour
-LCM,10 Every 10 minutes on the 1/6th hour
-LCM,15 Every 15 minutes on the 1/4 hour
-LCM,30 Every 30 minutes on the 1/2 hour
-LCM,60 Every hour on the hour
-LCR Start recording right away
-LCMIN Minimize Application after Log continuous window starts up
-LCTH,x Threshold setting. Readings equal to or greater than x (in mpsas)
get recorded. If x=0 then all readings are get recorded.
-LCGRS Run GoTo script then shut down when done
Table 7.6: Select device command line parameters
Parameter Description
-SEI,x Select Ethernet device where x = IP address
-SEM,x Select Ethernet device where x = MAC address
-SUC,x Select USB device
where x = communication portname i.e. /tty/USB0
-SUI,x Select USB device where x = ID number ex FTD12345
Table 7.7: Select device command line parameters
Parameter Description
-N Do not search for devices at startup. This cuts down startup time,
the user must press the
Find
button to find devices.
-P Display plotter window.
An example for the Windows shortcut, in the Target, put the command in quotations and add the command line
parameters to the end like this example to find the USB device with USB ID 12345678 and starts logging to disk:
"C:
\
Users
\
User
\
AppData
\
Local
\
Unihedron
\
udm.exe" -SUI,12345678 -LCR
62
Unihedron SQM-LU-DL Operator’s Manual -
20220119