Unigas RX63, Руководство по установке, использованию и обслуживанию

Страница: 21 / 127

PART II: INSTALLATION
21
BURNER SAFETY
The burners - and the configurations described below - comply with the regulations in force regarding health, safety and the environ-
ment. For more in-depth information, refer to the declarations of conformity that are an integral part of this Manual.
Residual risks deriving from misuse and prohibitions
The burner has been built in order to make its operation safe; there are, however, residual risks.
DANGER! The safety elements and devices have been realized to protect from risks deriving from expected use,
adjustment and maintenance. Tampering with them, even minimally, and therefore creating dangerous situations
for people, property and the surrounding environment, is strictly forbidden.
Do not touch any mechanical moving parts with your hands or any other part of your body. Injury hazard
Do not touch any parts containing fuel (i.e. tank and pipes). Scalding hazard
Do not use the burner in situations other than the ones provided for in the data plate.
Do not use fuels other than the ones stated.
Do not use the burner in potentially explosive environments.
Do not remove or by-pass any machine safety devices.
Do not remove any protection devices or open the burner or any other component while the burner is running.
Do not disconnect any part of the burner or its components while the burner is running.
Untrained staff must not modify any linkages.
After any maintenance, it is important to restore the protection devices before restarting the machine.
All safety devices must be kept in perfect working order.
Personnel authorized to maintain the machine must always be provided with suitable protections.
ATTENTION: while running, the parts of the burner near the generator (coupling flange) are subject to overhea-
ting. Where necessary, avoid any contact risks by wearing suitable PPE.