9
MOUNTINGS AND CONNECTIONS
Packing
The burners are dispatched in cardboard packages whose dimensions are:
Standard blast tube: mm 600 x 370 x 400 (W x H x D)
Extended blast tube: mm 750 x 370 x 400 (W x H x D)
Packing cases of this kind are affected by humidity and are not suitable for stacking. The following are placed in each
packing case.
burner;
light oil flexible hoses;
light oil filter;
gasket to be inserted between the burner and the boiler;
envelope containing documentation.
To get rid of the burner’s packing and in the event of scrapping of the latter, follow the procedures laid down by current laws
on disposal of materials.
Handling the burner
WARNING!
The handling operations must be carried out by specialised and trained personnel. If these
operations are not carried out correctly, the residual risk for the burner to overturn and fall down still persists
To move the burner, use means suitable to support its weight (see paragraph “Technical specifications”).
The burner is designed to work positioned according to the picture below. For different installations, please contact the
Technical Department.
Montaggio del bruciatore alla caldaia
To install the burner into the boiler, proceed as follows:
1
on the boiler’s door hole, fix the 4 stud bolts according to the drilling template shown on paragraph “Overall
dimensions”
2
fix the flange of the burner to the boiler;
3
install the burner into the boiler;
4
according to the reference showed on Fig. 2, fix the flange to the boiler’s stud bolts D, without completely fastening;
5
loosen the VS screws in order to let the blast tube move back and forth;
6
install the burner making the blast tube move into the flange as to reach the right position according to the
boiler/utilisation
7
fasten the VS screws:
8
tighten the 4 stud blolts D completely;
9
seal the space between the blast tube and the refractory lining with appropriate insulating material (ceramic fibre cord
or refractory cement).
TOP
BOTTOM
