C.I.B. UNIGAS
- M039135CG
26
Disassembling the burner plate for the fan maintenance
To clean/replace the fan, follow the next procedure:
1
remove the burner plate
C
by unscrewing the
V1
,
V2
,
V3
screws and the
F
fixing pin;
2
hang the plate in one of the ways showed on Fig. 20 figure in order to make maintenance operations easier.
NOTE: When re-assembling the component plate, make sure that the pin for the air damper "P" enters its housing "B"
(see next figure).
Removing the combustion head
и
замена
электродов
To remove the combustion head, proceed as follows:
1
remove the burner cover;
2
unscrew the
VT
fixing screws;
3
disconnect the ignition cable
CA
; unscrew the fixing nuts
D
and shift the combustion head off its housing;
4
adjust the electrodes: to replace them, if necessary, disconnect the cables and unscrew
VE
;
5
remove the electrodes and replace them;
6
to clean the combustion head, use a vacuum cleaner; to scrape off the scale use a metallic brush;
7
replace all the items reversing the procedure.
CAUTION: during the assembling phase, before tightening screws V1, V2, V3, mount and tighten screws S1 and S2.
Fig. 19
Fig. 20
F
C
V2
V1
V3
B
E
P
VT
CA
D
VE
