Unigas E165A, Руководство по установке, использованию и обслуживанию

Страница: 11 / 52

PART I: SPECIFICATIONS
11
Performance Curves
To get the input in kcal/h, multiply value in kW by 860.
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15° C
NOTE: The performance curve is a diagram that represents the burner performance in the type approval phase or in the laboratory tests, but does not
represent the regulation range of the machine. On this diagram the maximum output point is usually reached by adjsuting the combustion head to its
“MAX” position (see paragraph “Adjusting the combustion head”); the minimum output point is reached setting the combustion head to its “MIN” position.
During the first ignition, the combustion head is set in order to find a compromise between the burner output and the generator specifications, that is why
the minimum output may be different from the Performance curve minimum
Pressure in the Network / gas flow rate curves(natural gas)
BACK PRESSURE IN
COMBUSTION CHAM
BER
mbar
E165A
kW
E205A
kW
G
AS PRESSURE IN
TH
E NETW
O
R
K mbar
E165A
Gas rate Stm
3
/h
E205A
Gas rate Stm
3
/h
WARNING: the diagrams refers to natural gas. For different type of fuel please refer to the paragraph “Fuel” at
the beginning of this chapter.
The values in the diagrams refer to natural gas with a calorific value of 8125 kcal/Stm
3
(15°C, 1013 mbar) and a density of
0.714 kg/Stm
3
.
The values in the diagrams refer to GPL with a calorific value of 22300 kcal/Stm
3
(15°C, 1013 mbar) and a density of 2.14 kg/
Stm
3
. When the calorific value and the density change, the pressure values should be adjusted accordingly.
Where:
Natural gas pressure shown in diagram
Real gas pressure
Natural gas flow rate shown in diagram
Real gas flow rate
Natural gas density shown in diagram
Real gas density