Unify OpenStage M3 Plus Скачать руководство пользователя страница 13

Страница: 13 / 89

Putting the handset into service

Inserting the battery

The handset is supplied with an approved battery. The battery is not charged
when supplied. It is first charged in the handset.

Opening the battery compartment

1. Loosen and remove the screw from the battery cover with the Allen key.
2. Insert a suitable screwdriver into the recess between the housing and battery

cover, turn it and then raise the battery cover.

3. Lift up the battery cover from the housing.

While you are wearing the handset on the belt you will be able to read the
display without having to remove the handset, see



Page 66.

• Do not remove the battery in Ex zones.
• Please observe the safety notes



Page 2.

• Only use approved batteries



Page 82.

• Open the battery compartment in a dust-free environment only.
• Your phonebook entries and all settings remain stored even if you re-

move the battery. The date and time settings will be reset.

• Only remove the battery if it is defective. The battery's life diminishes

each time it is removed.

Содержание OpenStage M3 Plus


























































































Результаты поиска

Содержание OpenStage M3 Plus

Отзывы:

Похожие инструкции для OpenStage M3 Plus

Бренды по названию

Популярные бренды

Unify OpenStage M3 Plus, Руководство пользователя

Результаты поиска

Содержание OpenStage M3 Plus

Отзывы:

Похожие инструкции для OpenStage M3 Plus

Бренды по названию

Популярные бренды