Administration
A31003-S2030-M100-11-76A9, 01/2015
58
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
LAN Settings
3.2.2.3
Manual configuration of a VLAN ID
To configure layer 2 VLAN manually, make sure that VLAN discovery is set to "Manual" and
LLDP-MED is disabled. Then, the phone must be provided with a VLAN ID between 1 and
4095. If you mis-configure a phone to an incorrect VLAN, the phone will possibly not connect
to the network. In DHCP mode it will behave as though the DHCP server cannot be found, in
fixed IP mode no server connections will be possible.
Administration via WBM
Network > General IP configuration
The phone must be provided with a VLAN ID between 1 and 4095. Set the VLAN discovery to
"Manual". Afterwards, click
Submit
.
Administration via Local Phone
To enable VLAN discovery by Manual, select
Manual
in the
VLAN discovery
option.
|
---
Admin
|
---
Network
|
---
General IP Configuration
|
---
VLAN ID
|
---
Admin
|
---
Network
|
---
General IP configuration
|
---
VLAN discovery
LLDP-MED Enabled
DHCPv6 Enabled
VLAN discovery
VLAN ID
DNS domain
Protocol Mode
Primary DNS
Secondary DNS
HTTP proxy
IPv4_IPv6
General IP configuration
Manual
;
DHCP Enabled
Submit
Reset
192.168.1.105
192.168.1.2