Startup
A31003-S2030-M100-11-76A9, 01/2015
44
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
inbetriebnahme.fm
Cloud Deployment
2.5
Cloud Deployment
This chapter describes how a phone progresses through the cloud deployment process from
factory start-up until the cloud service provider considers it to be ready for use by its User.
The phone determines that a cloud deployment process is to be used based on the IP settings
it receives from the DHCP at the customer site. The Unify Redirect server
1
requires a code to
determine which cloud service provider is responsible for the phone. The code is provided as
part of a pin supplied from the cloud organisation to the User. When the User enters the pin at
the phone the Unify Redirect server redirects the phone to a DLS-WPI based management sys-
tem operated by the cloud service provider, This management system completes the configu-
ration of the phone with all the information required for it to be usable and may also customise
the phone for the cloud service provider's 'house' style.
2.5.1
Process of Cloud Deployment
The following flow chart shows the way from a factory start-up until a user prepared OpenStage
phone, deployed by a relevant DLS-WPI based management system.
Preconditions
:
•
Phone is not running
•
Phone is set to factory default values
•
The phone has a LAN connection
•
The LAN connection provides access to the public internet
1. The address for the Unify Redirect server is hardcoded as "'cloud-setup.com"
The phone has all the information
that it needs to contact a DNS serv-
er. A DLS address is not provided.
DHCP is available; IP address allo-
cated to the phone; DNS address is
available; Subnet mask is available;
Router address is available; no DLS
address available; no SIP address-
es available
Start
Phone broadcasts a DHCP
request
A DHCP server responds
with IP addresses
The phone detects that a
cloud deployment is re-
quired
