![Unify OpenStage 60/60 G Скачать руководство пользователя страница 68](http://html.mh-extra.com/html/unify/openstage-60-60-g/openstage-60-60-g_user-manual_842288068.webp)
68
Enhanced phone functions
Sending a trunk flash
To activate ISDN-type services and features through the network carrier's
analog trunks or those of other communication platforms (such as "consultation
hold"), you must send a signal to the trunks before dialing the service code or
telephone number.
Prerequisite:
You have set up an external connection.
v
Open the
Service Menu
Select and confirm the option shown.
Select and confirm the option shown
1
.
j
Enter the service code and/or telephone number.
If you cannot reach a destination
Call waiting (camp-on)
Prerequisite:
You have dialed an internal number and hear a busy signal. It is
important that you reach the called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the display and the busy
tone is followed by the ring tone.
The called party can then respond
Busy override - joining a call in progress
This function is only possible if it has been configured by your administrator.
Prerequisite:
You have dialed an internal number and hear a busy signal. It is
important that you reach the called party.
Select and confirm the option shown.
The called party and person to whom this party is talking hear an alerting tone
every two seconds.
If the called party has a system telephone with display, the following appears on
the screen: „Override: (Number or name)".
You can now start talking.
Calls
g
Trunk flash
1.
”Differing display views in a HiPath 4000 environment”
Camp-on
The called party can prevent this automatic call waiting
If this feature is configured (consult your administrator), you will hear the
ring tone and the message "Camp-on" is immediately displayed.
Override