114
More functions/services
Communicating with PC applications over a
CSTA interface
If configured (consult your administrator), you can use your phone to
communicate with PC applications (CSTA =
C
omputer
S
upported
T
elecommunications
A
pplications). You send information to the application and
receive information from the application, for example, via your phone display.
S
Press the "Data I/O" key, key programming
j
Enter the three-digit ID for the application you wish to control.
e
,
0
...
9
Use the TouchGuide and the dialpad for communication with the application.
Temporarily interrupting communication with the application
^
The phone rings. You answer the call.
T
The LED on the "Data I/O" key flashes: Communication with the application was
automatically interrupted.
Resuming communication with the application
T
Press the flashing "Data I/O" key. The LED lights up.
Ending communication with the application
Select and confirm the relevant CSTA message.
or
^ \
Lift the handset and replace it again.
Controlling relays (only for
HiPath 3000
)
If this function has been configured (consult your administrator), you can use up
to four relays to enable/disable different devices (such as a door opener).
Depending on how you program the relays, you can activate and deactivate
them manually or configure them to activate and deactivate automatically (after
timeout).
Select and confirm the option shown.
or
Select and confirm the option shown.
1
...
4
Enter the relay.
Special features must be taken into consideration if your telephone
operates with system networking via LAN
Control Relay On
Control Relay Off
