General information
13
Service
If you experience problems or defects with the phone, please dial the service number for your
country.
Intended use
The OpenStage phone is a desktop unit designed for voice transmission and for connection to the
LAN. It can also be used as a workstation device. Any other use is regarded as unauthorised.
Telephone type
The phone name data can be found on the name plate on the base of the device; The exact prod-
uct name and serial number are specified here. Specific details concerning your communications
platform can be obtained from your service technician.
Please have this information ready when you contact our service department regarding faults or
problems with the product.
Speakerphone quality and display legibility
• To ensure good speakerphone quality, the area in front of the telephone (front right) should be
kept clear).
The optimum handsfree distance is 20 inch (50 cm).
• Proceed as follows to optimise display legibility:
– Turn the phone to tilt the display. This ensures you have a frontal view of the display while
eliminating light reflexes.
– Adjust the contrast as required
Single-line telephone/multi-line telephone
Your OpenStage 40 is a "multi-line telephone". This means that multiple lines can be configured,
which is not the case with single-line phones. Each line is assigned an individual phone number
which you can use to make and receive calls.
The programmable sensor keys function as line keys on multi-line phones
The "Overview" tab on the telephony interface provides information about the lines configured on
your phone and the current status of each line
A number of specific features must be considered when using a multi-line phone to make and re-
ceive calls
Our service department can only help you if you experience problems or defects with the
phone.
Should you have any questions regarding operation, your specialist retailer or network ad-
ministrator will gladly help you.
For queries regarding connection of the telephone, please contact your network provider.
