Making calls with multiple lines
151
Configuring the "Overview" tab display
Specify here the sequence in which the individual lines on the "Overview" tab
should appear on the display.
z
You can also configure this setting via the WBM interface
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
All lines that are displayed in the overview
Page 147 are listed.
Select and confirm the required line (e.g. primary line).
Select one of the following options from the context menu to move an individual
line:
• Move up
• Move down
• Move to top
• Move to bottom
or
Select and confirm the option shown to arrange the lines in the same sequence
as the line keys.
or
Select and confirm the option shown to display all line keys in the overview.
Select the softkey to confirm
.
Services
User
Configuration
Keyset
Overview
Primary Line 1
Use FPK order
Add all lines
The setting made for "Allow in overview"
Page 147 is ignored here.
Save & Exit
