Unifone Small Office, Инструкция по установке и программированию

Страница: 53 / 96

S e c t i o n 3 – S y s t e m P r o g r a m m i n g
49
Hold, Transfer & Ring Settings
The system provides many programmable timers to change the duration of ringing and the time
exchange line calls can be left on hold or unanswered. It is also possible to change the operation of
held or blind-transferred calls. If they are left unanswered they will ring back at all extensions by
default, this can be changed to ring back the last extension first, before ringing all extensions.
Default
Held or blindly transferred calls that time out will ring back at all extensions
Exchange line hold timer is 4½ minutes
Exchange line park timer is 3 minutes
Exchange line call camp timer is 1 minute
Attendant/door phone ring timer is 30 seconds
Extension ring timer is 1½ minutes
Blind transfer timer is 1 minute
Call back extension timer is 30 seconds
Held / Transferred call ring back
A call either transferred or placed on hold will ring back all extensions by default. Calls can be set to
ring back the last connected extension first, before ringing all extensions.
Timed-out call rings back at last connected extension
Timed-out call rings back at all extensions
Exchange line hold timer.
When a call is placed on hold using the Hold key or the R00 (R00 for 9 for line systems) sequence on
a telephone it will remain on hold for a programmable length of time between 30 seconds and 4½
minutes. After this timeout, the call will ring at the extension that put the call on hold. If this
extension is busy, or not answered for 30 seconds then the call will ring as a general incoming call.
Set exchange line on hold timeout delay
Exchange line park timer
When a call is placed on park using R85 sequence on a telephone it will remain on park for a
programmable length of time between 30 seconds and 4½ minutes. After this timeout, the call will
ring at the extension that put the call on park. If this extension is busy, or not answered for 30
seconds then the call will ring as a general incoming call.
Set exchange line call park timeout delay
Exchange line call camp timer
When a call is placed on camp while the extension is busy by dialling 3 on a telephone it will remain
on camp for a programmable length of time between 30 seconds and 4½ minutes. After this
timeout, the call will ring at the extension that put the call on camp. If this extension is busy, or not
answered for 30 seconds then the call will ring as a general incoming call.
Set camp on exchange line timeout delay
Attendant/Door phone ring timer
When a call is ringing at the programmed attendant extension following from a courtesy service call
(page 43) it will ring at the extension for a programmable length of time between 15 seconds and 135
seconds. The same timer is used to time-out extension ringing following a call from the door phone.
After this time-out expires the ringing will stop.
Set extension / door phone ring timeout
Key
delay (x30s) =
1 – 9 for delay in
multiples of 30 seconds,
1=30, … 9=4.5min
delay (x15s) =
1 - 9 for delay in
multiples of 15 seconds,
1=15, … 9=2m 15s.
delay (x30s)
delay (x30s)
delay (x30s)
delay (x15s)