
I n s t a l l a t i o n & P r o g r a m m i n g M a n u a l
44
The system could, for example, switch to night time operation during a lunch break for one hour at
noon every day.
It may be switched between day and night modes in three different ways:
Automatically switch during two time periods for each day of the week to switch to day mode
automatically. Night mode is used for all other times.
Using programming codes to manually switch between day and night at the master extension.
Using a switch on alarm loop 2 to switch between day and night modes manually.
The display on the Executive Terminal will show ‘night’ when it is in night time operation.
Default
The system is in day mode permanently.
Automatic Day & Night Switching by time
Step 1
: (Optional) Erase existing day-night zone settings if previously programmed
Clear current Day Zone Settings
SYSTEM SETTINGS
Clock Settings
Clear day
time zone
Step 2
: Define period of day to use as daytime service.
Set Day Zone Used In Automatic Mode (repeat code for single second
period later each day).
SYSTEM SETTINGS
Set day time zone
The same command is repeated if there are two different periods in a day that the system is to
be in day mode. The start time chosen for zone 2 must be later than the end time for day zone
1, otherwise the system will return error tone.
Step 3
: Switch on automatic switching.
Switch on automatic day/night switching
GENERAL SETTINGS
Day-Night mode
mode : Automatic mode
Manual Day/Night Setting by programming code
Set to Day Mode and switch off automatic day/night switching
GENERAL SETTINGS
Day-Night mode
mode : Adhoc day mode
Set to Night Mode and switch off automatic day/night switching
GENERAL SETTINGS
Day-Night mode
mode : Adhoc night mode
Manual Day/Night Setting with switch
Use switch on alarm loop 2 for day/night switching
SYSTEM SETTINGS
Alarms
Alarm 2 function
Funct: day/nightswitch
Disable switch on alarm loop 2 for day/night switching and set to day
mode (reset alarm loop 2 settings)
When the switch contact is closed the system will be in day mode, when the switch contact is open
the system will switch to night mode. This setting will override any security alarm function previously
programmed onto alarm loop 2.
Door Phones & Relays
There is a normally open contact for a door latch provided on the system. This operates as closed
contact for 5 seconds when triggered using the code *719# or *729#. This delay can be set as either
5 seconds or 10 seconds. The 206 system supports one door phone and one door latch, the 208 and
212 systems support up to two door phones and two door latch relays.
The 212 system supports up to 2 external door phones, sharing extension ports 23 and 24. In order
to connect a door phone, the extension must be switched to door phone operation. Should the door
phone be removed then the extension must be returned to regular extension operation. Extension
system programming is ignored when it is switched to door phone operation.
PIN
PIN
hhmm, HHMM
Key
hhmm =
start time 24hr format
HHMM =
end time in 24hr format
PIN
PIN
212 only!
Содержание Small Office
Страница 1: ...Unifone Installation and Programming Manual...
Страница 4: ...I n s t a l l a t i o n P r o g r a m m i n g M a n u a l iv...
Страница 95: ...I n d e x 91...