UniFlow microMIND V2, Руководство по установке и настройке

Страница: 24 / 42

▪ MiCard V2 HID: use extended data: ▪
By default this parameter is disabled. You only need to enable this option, if you have
upgraded an SSP (Serverless Secure Printing) installation to uniFLOW.
▪ Upload USB HID configuration file: ▪
Here you can upload keyfiles (V1) for non-NT-ware USB card readers, which are
usually not accepted by the microMIND. These are required in certain projects. The
V1 keyfiles are distributed through the NT-ware project team or support.
Port Configuration
The Port Configuration site allows you to change the DIPORT Settings.
These can be changed by uploading a certain configuration file (PORT.INI). Please refer to
chapter microMIND V2 Signal Interpreter and Configuration (on page 16) in the
microMIND install manual for more information about creating such a configuration file.
You can reset the port configuration settings to its default values by clicking on Upload
& Reboot while leaving the Upload Port I/O configuration file field empty.
12
microMIND V2 Website
6.3