0014_Installation_Operation_Manual
A0
Copyright 2017 Unifire
Care should be taken to avoid damage to the electronics installed inside the enclosure. Removal of the
electronics is recommended prior to drilling. This is easily achieved by unscrewing the 4 x M4 6mm
Phillips head screws that fasten the baseplate to the enclosure body.
CAUTION
The internal electronics are sensitive to static discharge. Care must be taken when handling the
electronics to avoid exposure to static. As a minimum make contact with a ground connection prior to
touching the electronics.
Temperature Switch (Optional)
1
M4 Baseplate Mounting Bolt (x4)
2
Field Interface Board
3
Main Control Board
4
Baseplate
5
NEMA 4X Enclosure
6
1
2
3
4
5
6
7
Fuses (Located on underside)
7
Figure 2 - Electronics Assembly