32
To...
From the Base
From a Cordless Handset
turn on Call Screen
Not Available
Press
MENU/OK
then select
Answering Setup/Call
Screen
menu. Turn call
screen on or off.
hear the caller leaving a
message
Just listen to the caller over
the speaker.
Press
MENU/OK
.
answer the call
Pick up the corded
handset.
Press
TALK/FLASH
.
mute the call screen
without answering
Press
CLEAR/MUTE.
Press
END/CLEAR
or return
the handset to the cradle.
#
If you mute the call screen, the system continues taking the message: it just stops
playing through the speaker.
using the system While you’re away from home
You can also operate your answering system from any touch-tone phone. Before you
can use this feature, you have to program a security code.
programming a security Code
1. With the phone in standby, open the menu. Select
Answering Setup
, then select
Security Code
.
2. Use the number keypad to enter a two-digit security code (01 to 99). Press
MENU/OK
when you’re finished.
#
Remember to make a note of your new security code!
Dialing in to your system
1. Call your telephone number and wait for the system to answer.
- If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you
have new messages and 4 rings if you don’t. You can hang up during the third ring.
- If your answering system is off, it will answer after about 15 rings and sound a
series of beeps instead of your greeting.
2. During the greeting (or beeps), press # and immediately enter your security code. (If
you enter it incorrectly 3 times, the system hangs up and returns to standby.)
3. The system announces the time, the number of messages in memory, and a
help prompt. It beeps
intermittently to let you
know it’s waiting for a
command.
4. When you hear beeping,
enter a 2-digit command
from the chart:
#1
Repeat message
#2
Play message
#3
Skip message
#4
Delete message
#5
Stop playback
#6
Turn the system on
#9
Turn the system off
#0
Hear help prompts
#
If you don’t press any keys for 15 seconds, the phone will hang up and return to
standby.
