4
Test the Connection
Pick up the corded handset from the base. You should hear a dial tone
and the display on the base should say
Talk
. When you get a dial tone,
make a quick test call.
If...
Try...
the display says
Check Tel
Line
or you don't hear a dial
tone
checking the connection between the
base and the phone jack.
there's a lot of noise or static
see page 30 for tips on avoiding
interference.
Set Up the Accessory Handset(s)
If your phone came packaged with accessory handsets, follow the steps
below to get your cordless handsets ready for use.
Install the battery
1) Unpack all handsets, battery packs,
and battery covers. If any
handset has the battery
cover already attached,
press in on the notch and
slide the cover down and
off.
2) Line up the battery pack
connector with the jack inside the
handset. (The battery connector
will only fit one way.)
Push the battery pack connector
3)
in until it clicks into place. Tug
gently on the wires to make
sure the battery pack is securely
connected.
Red
Black
XDECT SSE27.indd 4
28/9/11 12:23:09 PM