19
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
Enter the code number (up to 20 digits) into the phonebook just like a
regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
When you hear the prompt that tells you to enter the number, open
the phonebook and find the entry that contains your code number.
Press
SElECT/MENU
to transmit the code. The phone transmits the code
number exactly as you entered it in the phonebook.
Finding a Lost Handset
With the phone in standby, press
INTERCOM/HOlD
on the base. Select the
handset you want to find, or select
All
to page all handsets at the same
time. The paged handset(s) will beep for one minute, or until you press
INTERCOM/HOlD
again or press
TAlk
and then
FlASH
/
EXIT
on the handset.
Using an Optional Headset
You can use a standard 2.5 mm telephone headset with your
cordless handsets. To purchase headsets, visit our
website; www.uniden.com.au for Australia or www.
uniden.co.nz for New Zealand.
To install a headset, remove the headset jack cover
and insert the headset plug into the jack. Just make
and receive calls as usual, and use your headset to
talk to the caller after the call connects.
When you connect a headset, the handset automatically mutes the
earpiece and speaker. To re-activate the earpiece or speaker, just
unplug the headset.
XDECT SSE27.indd 19
28/9/11 12:23:25 PM
