31
your DSL service might have left some filters for you; if not, call your DSL
provider or look in any electronics store.
Plug the DSL filter into the telephone wall jack and then plug your phone’s
base into the filter. Make a test call to make sure the noise is gone.
resetting and registering Handsets
If you are having trouble with a cordless handset or if you want to replace
one, you need to clear the registration information from the base and the
handset:
Do you have the base the handset is registered to?
Yes
No
Press and hold
1.
FLASH/ExIT
and
HASH
(#)
until the
System Reset
menu
appears (about 5 seconds).
Select
2.
Deregister HS.
The display
lists all registered handsets.
Select the handset you want to reset.
3.
When the phone asks you to confirm,
4.
select
Yes
. The handset clears its
information from the base and deletes
its own link to the base.
Press and hold
1.
FLASH/ExIT
and
HASH (#)
until the
System Reset
menu appears (about 5 seconds).
Select
2.
Base Unavailable
.
When the phone asks you to
3.
confirm, select
Yes
. The handset
deletes its own link without
contacting the base.
When you reset a handset (or if you purchase a new one), that handset
displays a
Handset Not Registered
message. If you see this message on
a handset, you need to register it to a base before you can use it.
Registering a handset
On the base, open the menu and select
1)
Register Handset
. The
display should say
Handset Registering
.
On the handset you want to register, press and hold
2)
HASH (#)
until the
handset display says
Handset Registering (
about 2 seconds).
In about 30 seconds, the handset display should say
3)
Registration
Complete
. Press
TAlk
and make sure you get a dial tone.
If...
Try...
you don't hear a dial tone
-
the display says
-
Registration Failed
Making sure the handset is fully
charged, then start over at step 1.
To register a handset to a different base, see the section "Expanding
Your Phone" in the user's guide for the other base.
XDECT SSE27.indd 31
28/9/11 12:23:32 PM
