21
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
Operation
NOTE
VOX feature will not work without the VOX Headset
Microphone. The built in mic of UH076DLX is temporarily
disabled when VOX feature is working, however accidental
pressing of
PTT
will cause the unit to transmit briefly.
To activate VOX
1. Press and hold
vox
for 1.5 secs.
VOX
icon blinks.
2. Press either
or
within 10 secs to select the desired
VOX sensitivity level (9 with the lowest sensitivity to 1 with the
highest sensitivity).
3. Press
vox
to save the selected level. VOX icon stops blinking.
4. Install VOX Headset (not supplied) to UH076DLX.
To De-activate VOX
1. Remove VOX Headset from UH076DLX.
2. Press and hold
vox
for 1.5 secs. until VOX blinks.
3. Press
repeatedly and until
oF
is displayed.
4. Press
vox
to save the setting.
VOX
icon disappears.
NOTE
Changing the VOX sensitivity setting to oF without removing
the microphone will cause the unit to transmit continuously.
Power Save
Battery Save feature extends the battery life by switching the receiver
circuit power ON and OFF. This feature automatically activates during
standby mode (RX mode without signal).
Back Lighting
The Liquid Crystal Display (LCD) and function keys are backlit for easy
viewing at night or in low light situations. The back lighting automatically
switches ON every time a key (except PTT) is pressed. It turns OFF 5
