11
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
Getting Started
Conventional Mounting with Screws
Use the front part of the Hang-up Bracket only.
Locate a suitable mounting position in the vehicle
and mark and drill two 3mm holes. Fix the Hang-
up Bracket into place with screws.
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the Hang-up Bracket using the
supplied binding screws.
Locate a suitable mounting position.
Apply high quality Double-Sided tape
onto the flat area of the Hang-up
Bracket back piece and then press
firmly to the mounting position.
SPKR/MIC Jack Cap
Make sure the SPKR/MIC jack cap is firmly pushed in to maintain
submersible rating.
Connecting the SPKR/MIC
Release the SPKR/MIC jack cap to plug in the SPKR/MIC. Secure the
SPKR/MIC plug by tightening the plug collar clockwise.
Mount the Hang-Up Bracket
Use the radio Hang-up Bracket when charging the UH076DLX with the
Cigarette Lead Charger in a vehicle. The radio Hang-up Bracket comes
in two parts. How and where you choose to mount the Hang-up Bracket
will determine which parts to use.
