Uniden UBCD396T, Руководство пользователя

Страница: 57 / 140

Programming Radio Systems
Programming Radio Systems
56
To get the most out of your UBCD396T you can
organize frequencies into programmed radio systems.
Programming radio systems is completed in two major
steps. Don't skip either step!
1. Plan the system.
2. Program the system into your scanner according
to the plan you prepared in Step 1.
To make planning easier, planning worksheets are
included in the back of this manual for each system
type. Copy the worksheets (or download this manual
from the Uniden website and print extra sheets), then
use them to plan out how you will program the
scanner.
Before you start programming your
scanner, make sure the batteries are fresh or fully
charged. If the scanner loses power while you
program it, its memory might be corrupted which will
require you to reinitialize it (see "Initializing the
Scanner’s Memory" on Page 52). All information
programmed in the scanner, including
preprogrammed systems, might be lost.
• You can store up to 400 systems.
• Trunking systems can have up to 200 channels
Each. The number of conventional system
channels you can have is limited only by the
amount of scanner memory remaining.
• You can store up to 20 channel groups per system.
• Total channels are limited to about 6000 (3000 is
Typical).
Important!
General Notes