Uniden UBCD396T, Руководство пользователя

Страница: 60 / 140

Programming Radio Systems
59
Programming Motorola Systems
Next, rotate the scroll control to select the type of
Motorola system you want to program, then briefly
press the scroll control to select it.
•
- Use for Motorola Astro APCO 25 Digital
systems in any band
• - Use for 800 MHz systems
that use the standard band plan
• - Use for 800 MHz systems
that use the splinter band plan (typically near
international borders)
Splinter systems have frequencies below
866 MHz that end in 0. For example, 851.0250
would be the frequency of a splinter system.
• - Use for 900 MHz systems
• - Use for VHF systems
• - Use for UHF systems
The scanner creates an empty MOT system,
with a default name of "System n M." "n" is a
number that increments as you add new systems,
"M" indicates that this is a MOT system.
Next, refer to the appropriate section to set
systemwide options. For most settings, you can
accept the default. However, for the items in , you
must enter information in order for your scanner to
scan the system.
• See “Editing the System Name” on Page 70
• See “Editing the System Quick Key” on Page 71
• See “Setting System Lockout” on Page 71
• See “Setting the System Hold Time” on Page 72
• See “Setting the Channel Delay Time” on Page 72
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 73
• See “Editing the Fleet Map (Motorola Systems
Only)” on Page 75 (
)
Program System
New System
MOT
P25
800MHz Standard
800MHz Splinter
900MHz Band
VHF band
UHF band
Confirm? Yes=”E” / No=”.”
Note:
Note:
bold
must be set up for Type I and
Type II Hybrid systems
• See "Setting the Band Plan (Motorola P25 and
VHF/UHF Systems Only)" on Page 74