Using the Scanner Memories
Using Priority Scan
You can set one memory in each bank as a priority memory. If you turn
on the Priority feature, the scanner will check the priority memories in
enabled banks every seconds, even if it has stopped on a transmission
on another memory.
To set the memory in a bank to be the priority memory, manually select
the memory then, while holding on the memory, press
E/PGM
to put the
scanner in program mode and press
PRI
. The scanner turns on the icon
when it is stopped on a memory designated as priority.
To turn on Priority Scan, press
PRI
while the scanner is scanning or
holding on a memory (but not in program mode). You will notice a short
break in audio every seconds as the scanner checks the enabled priority
memories. If there is a transmission on a priority memory, the scanner will
immediately tune to that memory.
Setting Channel Delay
You can set the scanner to pause for seconds at the end of a
transmission on a memory. This is useful to help prevent missed replies.
Delay is turned on by default when you program a memory. To turn Delay
off (or back on), first, select the channel. Then, press
DELAY
.
The scanner turns on the
DELAY
icon for memories that have been
programmed with delay.
UB355ZH(UBC360CLT).indd 22
2008/04/08 15:56:05
