6
STEP 3:
Press
STEP
, and then press
▲
,
▼
to change the step and decide it.
Holding
▲
or
▼
to change the step continuously.
By pressing
CLR
, you can change the step into previous step that goes to
step menu.
STEP 4:
Press
ENT
to go to previous mode.
Or wait for 5 seconds to return to the mode you were in.
Press
SCAN
to go to scan mode.
Press
SEARCH
to go to search mode.
Move the MODE slide switch to “Aircraft” to go to Aircraft (Hold) mode.
Move the MODE slide switch to “AM/FM” to go to AM/FM radio mode.
Notes:
• The all lockout frequencies of the band automatically can be unlocked
when the step is changed at the Band.
• The frequency can be programmed by 5kHz step even though the
step is set up to 15kHz or 0kHz.
Select Step Operation
UB355ZH(UBC360CLT).indd 26
2008/04/08 15:56:06