7
Features
Channel Memory Scanning
- Scans frequencies you have stored in any of the
channels or banks at a rate of up to 60 channels per second.
Memory Availability
- Store and then scan any of up to 100 channels distributed
over 10 banks.
Direct Channel Access
- Press
0
-
9
and
HOLD
to directly access any stored
frequency.
Channel Lockout/Frequency Lockout
- Skip over stored frequencies (channels)
using the Lockout feature to enable faster scanning. Lets you designate up to
50 frequencies to skip during a search (limit or service) to increase the scanning
speed.
Alarm Clock with Snooze
- provides standard radio broadcasts that you can set
as your alarm sound.
AM/FM and TV Broadcast
- lets you store up to 30 preset broadcast channels
(10 AM and 20 FM/TV) for quick access. TV Broadcast allows tuning to the audio
of CH 0-2 and 6-10 in Australian Mode and CH1-9 in New Zealand Mode.
Air Band
- separate search setting for Air band, 118MHz to 136.9875MHz.
Priority Channel
- Designate a specific frequency as a Priority Channel. Then
the radio scans and checks that channel every 2 seconds. Select and designate
up to 10 frequencies as Priority Channels (one per bank).
Duplicate Channel Alert
- Lets you know that a selected frequency has already
been programmed into memory if you attempt to store it again.
Limit Frequency Searching
- Lets you designate lower and upper frequency
range and search within that range for active frequencies.
You can then store frequencies in memory as channels for later recall.
Service Search
- Lets you designate one of the five preprogrammed service
channels (Police, Marine, Railroad, AM-CB, UHF-CB) to search.
Scan and Search Speed
Scan Speed
60 channels per second maximum in SCAN MODE.
•
Search Speed
60 steps per second maximum in SEARCH MODE.
•
TURBO MODE For frequency steps 5kHz apart, searching occurs in
•
Turbo Mode which is 180 steps per second.
Introduction
UBC330CRS OM.indd 7
10/9/09 12:42:14 PM
