21
Using the Scanner Memories
Once you fill out the above chart, follow these steps to enter or change a
frequency in a memory:
1. Press
E/PGM
to enter the program mode (the scanner turns on the PGM
icon).
2. If the current channel is not the one you want to program, enter the memory
number then press
HOLD
.
3. Enter the frequency including the decimal point, then press
E/PGM
.
4. To program the next memory, press
s
or
t
and repeat step 3. To program
a different memory, repeat from step 2.
5. To exit program mode, press
HOLD
or
SCAN
or change the scanner’s
mode.
Notes:
• Any frequency you program replaces the previous memory contents.
• If you enter a frequency you have already stored in a different memory
in Step 3, the scanner beeps and displays the channel where you have
previously stored the frequency. If you want to store the frequency
anyway, press
E/PGM
a second time in Step 3.
• To clear the contents of a memory, enter “0” in Step 3.
• Channels you program are automatically unlocked (see “Locking/
Unlocking Memories) and have Delay turned on (See “Setting Channel
Delay”).
Selecting a Memory
To select a single memory to monitor, press
HOLD
. The scanner turns on the
Bank 6
Bank 7
Bank 8
Bank 9
Bank 10
51
61
71
81
91
52
62
72
82
92
53
63
73
83
93
54
64
74
84
94
55
65
75
85
95
56
66
76
86
96
57
67
77
87
97
58
68
78
88
98
59
69
79
89
99
60
70
80
90
100
UBC330CRS OM.indd 21
10/9/09 12:42:18 PM
