Uniden Trunk Tracker IV BCD996T Скачать руководство пользователя страница 66

Страница: 66 / 75

If there is a wall switch that
controls power to the AC
outlet where you connected
the AC adapter, make sure it
is on.

Check the antenna
connection or move or
reposition the antenna.

Move the scanner.

Improper reception.

The antenna might need to be
adjusted.

You might be in a remote
area that could require an
optional multi-band antenna.
Check with your dealer or
local electronics store.

The squelch might need to be
adjusted.

Adjust the squelch threshold.
See “Turning On the
Scanner and Setting the
Squelch” on Page XX.

The antenna might need to be
adjusted.

Check the antenna
connection.

One or more channels might
be locked out.

Make sure the channels you
want to scan are not locked
out.

The channel’s frequency
might not be stored in
memory.

Make sure the channel’s
frequency is stored in the
scanner’s memory.

Scan won’t stop.

The channel might not be
active.

Wait for a transmission on
the channel.

You must press

[SCAN/SEARCH]

to scan.

Press

[SCAN/SEARCH]

The squelch might need to be
adjusted.

Adjust the squelch
threshold. See “Turning On
the Scanner and Setting
the Squelch” on Page XX.

One or more channels might
be locked out.

Make sure the channels
you want to scan are not
locked out.

Scan won’t start.

The antenna might need to be
adjusted.

Check the antenna
connection.

The squelch might need to be
adjusted.

Adjust the squelch
threshold. See “Turning On
the Scanner and Setting
the Squelch” on Page 42.

The antenna might need to be
adjusted.

Check the antenna
connection.

Weather scan doesn’t
work.

There might not be a NOAA
weather broadcast in your
area.

Move to an area with a
NOAA weather broadcast.

If you experience difficulty while in TrunkTracker™ mode, try the following steps.

Содержание Trunk Tracker IV BCD996T












































































Результаты поиска

Содержание Trunk Tracker IV BCD996T

Отзывы:

Похожие инструкции для Trunk Tracker IV BCD996T

Бренды по названию

Популярные бренды

Uniden Trunk Tracker IV BCD996T, Руководство пользователя

Результаты поиска

Содержание Trunk Tracker IV BCD996T

Отзывы:

Похожие инструкции для Trunk Tracker IV BCD996T

Бренды по названию

Популярные бренды