![background image](http://html1.mh-extra.com/html/uniden/trunk-tracker-iv-bcd996t/trunk-tracker-iv-bcd996t_user-manual_3948767064.webp)
64
Set Range
◙
Input how far away the alert sounds for the site (only available for POI’s)
For Dangerous Xing and Dangerous Road sites there are two additional settings:
.
Set Heading
◙
You can input the compass direction to the site from your present location or, you can select All Range.
For example: If the
Dangerous Road
location is toward the Northeast and you are driving in that direction, then choose
NE (45°)
If you know you will be driving a course which is not a fairly straight line to that site, choose
All Range
which will trigger the alert
regardless of direction as long as the other requirements (range, speed) are met.
If you travel in a Northeast direction and do not travel either side of a northeast line by up to 22 degrees, the alert system will function.
Set Speed Limit
◙
Choose from 0, through 100 MPH in 5 PHM steps or the equivalent in KPH for metric usage.
Set Lockout
◙
As you near your target location, an alert sounds at
0.5
,
0.25
, and
0.1
mi. If you hear the first and prefer to
not hear any others that occasion, simply press [L/O] to disable the operation while keeping all the data for another time. You can
use the menu
Lockout
option as well. When you set the location system to
Temporary L/O
and move away more than four miles
and then come back again,
L/O
status is automatically canceled. If you turn off the switch, the scanner is unlocked.
GPS Display Mode
If you press GPS, the scanner switches to a GPS display mode. In this mode, you can see location information as well as information
about your position relative to the selected POI. The third line of the screen shows
Off
if no POI is selected.
Rotate the
Scroll Control
to select different POI’s.
Press
[FUNC]
(
◙
) +
[GPS]
then rotate the
Scroll Control
to select among the following GPS screens:
[place screen shots of each GPS related screen with callouts to the screen fields]
GPS Review Location Mode
If you have programmed data for a Point of Interest, Dangerous Crossing, and a Dangerous Road, you can review each set on a
screen dedicated to showing just that data.
Press
[GPS]
and then
[E
YES
]
The most recent stored location is displayed. Use the Scroll Control to display the next screen for review.
Important
: While you are in normal GPS mode or Scan Mode and you press and hold
[GPS]
for 2 seconds, location data at that
point is stored. The scanner opens a dialog to store your current location. The default name is T YYMMDD hhmmss that indicates
the date and time you stored the location point.
The data is put into memory and you are given the opportunity to designate the location as POI, Dangerous Xing, or Danger Road.
However, if you are in Review Mode and press and hold [GPS], the data of the new point will overwrite the currently displayed data.
The some of the following keys have a somewhat different function while in GPS Review Mode.
[GPS]
— Press and Hold: overwrites and stores current location data
[MENU]
— returns to GPS Mode.
[L/O]
— changes the status of the currently displayed location data.
[L/O]
— press and hold to unlock all locations of the current type (POI, DXG, or DRG)
[L/O]
— press and hold in Function Mode unlocks all locations of all types.
Location System
and
All Unlocked
is displayed.
[.No]
— returns to GPS Mode.
[E
YES
]
— lets you edit a location details
[SCAN/SEARCH]
— enter scan mode.
[HOLD/RESUME]
— enter Scan Hold mode
◙
— enter Function Mode.
—
select a programmed location from all stored locations. The location data is stored in the order POI, Dangerous Xing, and
Dangerous Road. Then, within each category, the data is stored by the programmed name.