Uniden EZI33XLT+, Руководство пользователя

Страница: 33 / 40

If your E is not performing properly, try the
following steps .
Problem Possible
Cause
Suggestion
Improper
reception .
The scanner’s
antenna might need
to be adjusted .
Check the antenna connection or move
or reposition the antenna .
Move the scanner .
You might be in a remote area that
could require an optional multi-band
antenna . Check with your dealer or local
electronics store .
Scan won’t
stop . The squelch might
need to be adjusted .
Adjust the squelch threshold . See “To
adjust the squelch” on page 23 .
The antenna might
need to be adjusted .
Check the antenna connection .
The channel’s
frequency might
not be stored in
favourites .
Make sure the channel’s
frequency is stored in the scanner’s
favourites bank .
The channel might
not be active .
Wait for a transmission on the channel .
Scan won’t
start . You must be in
service or
favourites mode .
Press (Srvc/Fav) . If
HOLD
is showing
press (Hold) to resume .
The squelch might
need to be adjusted .
Adjust the squelch threshold . See “To
adjust the squelch” on page 23 .
The antenna might
need to be adjusted .
Check the antenna connection .
ErrChg
flashes
The battery cannot
be charged
The cause is an alkaline battery or a
defective nickel metal hydride battery .
TROUBLESHOOTING
31
UNIDEN E Scanner