Uniden EXP 7900 Series, Руководство пользователя

Страница: 7 / 12

4. Place the telephone cord into the right molded
channel cord holder and plug the other end of
the cord into the wall jack. (Remember, the
phone must be fully charged before you can
use it.)
5. Place the base on the two posts of the wall plate
and slide downward to secure.
6. Plug the AC adapter into a standard 120V AC
wall outlet that is not controlled by a wall switch.
7. Raise the antenna on the base.
t
Mounting Directly on a Wall
If you do not have a standard wall plate, you can
mount the phone directly on a wall. Before
mounting your cordless telephone, consider
the following:
•
Select a location away from electrical cables,
pipes, or other items behind the mounting
location that could cause a hazard when
inserting screws into the wall.
•
Make sure the wall material is capable of
supporting the weight of the base and
handset; otherwise, damage to the unit
could result.
•
Use #10 screws (minimum length of 1-3/8
inches) with anchoring devices suitable for
the wall material where the base will
be placed.
1. Insert the screws, with
their appropriate anchoring
devices, 3-15/16inches apart.
Allow 3/16of an inch
between the wall and screw
heads for mounting the phone.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside the left molded
channel cord holder.
4. Plug one end of the long telephone cord into the
TEL LINE
jack on the base.
5. Place the telephone cord into the right molded
channel cord holder.
6. Place the base on the screws and push down
until it’s firmly seated.
7. Plug the other end of the telephone line into the
telephone wall jack. (Remember, the phone
must be fully charged before you can use it.)
8. Plug the AC adapter into a standard 120V AC
wall outlet that is not controlled by a wall switch.
9. Raise the antenna on the base.
7
4. Place the telephone cord into the right molded
channel cord holder and plug the other end of
the cord into the wall jack. (Remember, the
phone must be fully charged before you can
use it.)
5. Place the base on the two posts of the wall plate
and slide downward to secure.
6. Plug the AC adapter into a standard 120V AC
wall outlet that is not controlled by a wall switch.
7. Raise the antenna on the base.
t
Mounting Directly on a Wall
If you do not have a standard wall plate, you can
mount the phone directly on a wall. Before
mounting your cordless telephone, consider
the following:
•
Select a location away from electrical cables,
pipes, or other items behind the mounting
location that could cause a hazard when
inserting screws into the wall.
•
Make sure the wall material is capable of
supporting the weight of the base and
handset; otherwise, damage to the unit
could result.
•
Use #10 screws (minimum length of 1-3/8
inches) with anchoring devices suitable for
the wall material where the base will
be placed.
1. Insert the screws, with
their appropriate anchoring
devices, 3-15/16inches apart.
Allow 3/16of an inch
between the wall and screw
heads for mounting the phone.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside the left molded
channel cord holder.
4. Plug one end of the long telephone cord into the
TEL LINE
jack on the base.
5. Place the telephone cord into the right molded
channel cord holder.
6. Place the base on the screws and push down
until it’s firmly seated.
7. Plug the other end of the telephone line into the
telephone wall jack. (Remember, the phone
must be fully charged before you can use it.)
8. Plug the AC adapter into a standard 120V AC
wall outlet that is not controlled by a wall switch.
9. Raise the antenna on the base.
Use only the AC adapter that came
with the phone.
Use only the AC adapter that
came with the phone.
C:...Exp 7900 B of B.vp
Wed May 24 13:19:32 2000
Color profile: Disabled
Composite Default screen