Uniden ELITE 8855 Series Скачать руководство пользователя страница 86

Страница: 86 / 96

The Caller ID does not

display.

You cannot register the

handset at the base.

The handset doesn't

communicate with other

Handsets.

An extra handset can't join

the conversation.

Room Monitor feature does

not work.

The answering system

does not work.

Messages are incomplete.

No sound on the base unit

or handset speaker during

call monitoring or message

playback.

• The handset was picked up before the second ring.

• The call was placed through a switchboard.

• Call your local telephone company to verify your Caller ID service is current.

There may be a problem with your Caller ID service.

• Charge the battery pack for 10 hours (for Flip Handset) or 15-20 hours (for

Extra Handset).

• De- register the handset (see “De- register the Handset” on page 85) and

• De- register the handset (see "De- register the Handset" on page 85) and

• Make sure that you have registered all handsets.

• Make sure there are not two handsets already using the conference feature

(see "Conferencing" on page 46 for 3-way & 4-way combinations).

• Make sure that another handset or base is not in privacy mode.

• Make sure to place the handset(s) within the range of the base work.

• Make sure that Room Monitor is set to On.

• Make sure the base unit is plugged in.

• Make sure that the answering system is turned on.

• Make sure that the message record time is not set to Announce only

(see page 66).

• The incoming messages may be too long. Remind callers to leave a brief

message.

• The memory may be full. Delete some or all of the saved messages.
• Adjust the speaker volume on the base unit or handset.

• Make sure the call screen feature is set to on.

Symptom

Suggestion

[83]

Содержание ELITE 8855 Series

































































































Результаты поиска

Содержание ELITE 8855 Series

Отзывы:

Похожие инструкции для ELITE 8855 Series

Бренды по названию

Популярные бренды

Uniden ELITE 8855 Series, Руководство пользователя

Результаты поиска

Содержание ELITE 8855 Series

Отзывы:

Похожие инструкции для ELITE 8855 Series

Бренды по названию

Популярные бренды