Uniden ELITE 8855 Series Скачать руководство пользователя страница 85

Страница: 85 / 96

TROUBLESHOOTING

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve

your problem, visit our website for further information (www.uniden.com.au or www.uniden.co.nz).

Symptom

Suggestion

The

LED won't

illuminate when the handset

is placed in the cradle.

The audio sounds weak.

Can't make or receive calls.

The handset doesn't ring or

receive a page.

Severe noise interference.

•

Make sure the AC adapter is plugged into the charger (if you have more than one

handset) and wall outlet.

•

Make sure the handset is properly seated in the cradle.

•

Make sure the charging contacts on the handset are clean.

•

Move the handset and/ or base away from metal objects or appliances and try again.

•

Make sure that you are not too far from the base.

•

Make sure that you are not too far from the base.

•

Make sure the line is not in use. If call is already using a line, you cannot use that

line to make another outside call.

•

Check both ends of the base telephone line cord.

•

Make sure the AC adapter is plugged into the base and wall outlet.

•

Disconnect the AC adapter for a few minutes, and then reconnect it.

•

De- register the handset (see “De- register the Handset” on page 85) and register

the handset (see “Register the Handset” on page 13).

•

Make sure that you are not too far from the base.

•

Charge the batteries in the handset for 10 hours (for Flip Handset) or 15-20 hours (for

Extra Handset) by placing the handset on the base or charging cradle.

•

De- register the handset (see “De- register the Handset” on page 85) and register

the handset (see “Register the Handset” on page 13).

•

Keep the handset away from microwave ovens, computers, remote control

toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent

lights, and electrical appliances.

•

Move to another location or turn off the source of interference.

charge

[82]

Содержание ELITE 8855 Series

































































































Результаты поиска

Содержание ELITE 8855 Series

Отзывы:

Бренды по названию

Популярные бренды

Uniden ELITE 8855 Series, Руководство пользователя

Результаты поиска

Содержание ELITE 8855 Series

Отзывы:

Бренды по названию

Популярные бренды