6
For wall mount use only
Connect the power and telephone Cords
1. Connect the base AC adaptor to the DC IN 9.0V jack and the telephone
cord to the
TEL LINE
jack. Route the cords as shown below.
2. Plug the AC adaptor into a standard 240V AC power outlet, and connect
the telephone cord to a standard telephone wall jack.
3. If you are mounting the phone on the wall, place the mounting slots over
the pins on the wall plate; slide the base down to lock it into place.
WALL
DESK
DESK
WALL
WALL
DESK
WALL
DESK
For desktop Use
For Wall Mount Use
1. On the front of the base, pull
the clip (that holds the corded
handset in place) out of its slot.
2. Rotate the clip 180 degrees.
3. Flip it from front to back and
slide it back into the slot.
Содержание DECT 2145 Series
Страница 35: ...35...
Страница 36: ...36 2014 Uniden Australia Pty Ltd Uniden New Zealand Limited Printed in Vietnam U01UN598BZZ 0...