[ 3 2 ] B A S I C S
w w w . u n i d e n . c o m
Earpiece and speaker volume
Pressing the volume up key or volume down key (labeled as
/vol/
∧
or
/vol/
∨
key)
during a call will change the earpiece volume of the handset. This setting will remain in
effect after the telephone call has ended.
When you press volume up key (
ring/vol/
∧
) in the maximum volume level or volume down key
(
ring/vol/
∨
) in the lowest volume level, an error tone sounds.
Do Not Disturb (DND)
DND allows you to mute the ringer of the handset and the base at once. Additionally, if you
have more than one handset, ringer for all handsets will be muted. To do this, in the
standby mode, press and hold
do not disturb
on the base. You will hear a confirmation tone
and the
DND
LED illuminates. To cancel, press
do not disturb
again. You can also mute the
ringer tone while the phone is ringing by pressing
do not disturb
on the base.
To mute the ringer tone for each handset or the base temporarily, when the phone is ringing:
- Press
end
on the handset, or
- Press
play/stop
on the base.
The ringer tone will return to the previous setting starting with the next incoming call.
•
Standby Mode
- The
handset is not in use
and
talk/flash
has
not been pressed.
•Setting the DND to on
while the answering
system is off turns the
answering system on
automatically. The
answering system
returns to the original
setting when you
cancel the DND.
•If you press
ans on/
off
when the DND and
the answering system
is on, both of the DND
and the answering
system will turn off.
note
BA
SI
C
S
UP323BH(DCT6485) OM ENG.book 32 ページ ２００３年１０月２４日 金曜日 午前１０時５６分
