[ 1 4 ] G E T T I N G S T A R T E D
w w w . u n i d e n . c o m
C. Connect the base unit
1) Connect the AC adapter to the
DC IN 9V
jack and to
a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and place the
handset in the base unit.
3) Raise the antenna to a vertical position.
4) Make sure that the
charge
LED illuminates.
If the LED does not illuminate, check to see that the
AC adapter is plugged in and the handset makes
good contact with the base charging contacts.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can
unplug the AC adapter easily.
• After installing the battery pack in the handset, charge your
handset at least
15-20 hours before plugging into the phone
line
.
5) Once the handset battery pack is fully charged,
connect the telephone line cord to the
TEL LINE
jack
and to a telephone outlet.
If your telephone outlet isn't modular, contact
your telephone company for assistance.
•Use only the supplied
[AD-830] AC adapter.
Do not use any other
AC adapter.
•Place the power cord
so that it does not
create a trip hazard or
where it could
become chafed and
create a fire or
electrical hazard.
note
UP323BH(DCT6485) OM ENG.book 14 ページ ２００３年１０月２４日 金曜日 午前１０時５６分
